| Model |
Product Image |
Item Name |
(Ex VAT) Price |
| MICROSD-BRK |
 |
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny... |
£10.25
|
| SDCARD-BRK |
 |
sku: BOB-00204 With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to... |
£6.90
|
| RJ45-BRK |
 |
This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breakboarding or... |
£1.30
|
| RJ45MAG-BRK |
 |
If you need to get your MagJack into a breadboard, this is for you. This board exposes all pins, LEDs, and housing with breadboard friendly spacing. ... |
£0.99
|
| OPAMP-BRK |
 |
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the... |
£3.40
|
| DC-DC_BRK |
 |
This is a breakout board for our non-isolated, 6A DC-to-DC Converter Module. The module can convert any DC voltage between 4.5-14VDC to a selectable... |
£19.60
|
| NCP1400-5V |
 |
The NCP1400 is a 5V DC-DC converter. The breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low ripple 5V output... |
£4.20
|
| NCP1400-3V |
 |
The NCP1400 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries) and output a... |
£4.10
|
| LIPO-BOOST |
 |
sku: PRT-10255 The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo... |
£10.20
|
| OPTO-BRK |
 |
sku: BOB-09118 This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a... |
£3.40
|
| PCM1803A-BRK |
 |
sku: BOB-09365 The PCM1803A is a high-performance, low-cost, 24-bit stereo analog-to-digital converter that can sample as high as 96k. The PCM1803A... |
£9.10
|
| LTC3588-BRK |
 |
sku: BOB-09946 This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for... |
£19.90
|
| ATMEGA8U2-BR |
 |
sku: DEV-10277 The board comes pre-loaded with the SparkFun USB to Serial COM Port firmware. When the board plugs into a USB port, Windows will ask... |
£12.90
|
| SC16IS750-BR |
 |
sku: BOB-09981 This is a breakout board for the SC16IS750, a handy chip used to convert I2C or SPI serial signals to a single-channel,... |
£10.30
|
| LOGIC-CONV4CH |
 |
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that... |
£2.90
|
| LOGIC-CONV8CH |
 |
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that... |
£5.70
|
| MCP4725-BRK |
 |
Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)??? Now it can! This... |
£3.80
|
