| Model |
Product Image |
Item Name |
(Ex VAT) Price |
| LLYP-BEGINKIT |
 |
sku: KIT-10354 The LilyPad Beginner's Kit is a great way to get started with the LilyPad e-textiles platform. Using the parts in this kit you can... |
£48.30

|
| LLYP-PRTSNAP-DEV |
 |
sku: DEV-10958 New version The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a... |
£40.00

|
| LLYP-PRTSNAP-ESEW |
 |
sku: DEV-10752 The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board,... |
£13.50

|
| LLYP-TECHSTYLES |
 |
Are you interested in e-textiles but don't know where to start? Or perhaps you're in need of a simple educational project to get kids working with... |
£9.80

|
| LLY-ESEWKIT |
 |
sku: KIT-10554 The LilyPad e-sewing kit contains the bits to sew LEDs (light emitting diodes) into any piece of clothing. Add turn signals to a... |
£13.40

|
| LLYP-328 |
 |
This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep... |
£15.40

|
| LLYPSIMPLE |
 |
sku: DEV-09725 This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the ... |
£13.50

|
| LLYP-FTDI |
 |
sku: DEV-10275 This is the LilyPad revision of our FTDI Basic . It is the same as our other FTDI Basic, but has a purple LilyPad board which is... |
£11.60

|
| LLYP-3CLED |
 |
Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any... |
£5.45

|
| LLYP-ACC |
 |
This is a three axis accelerometer for the LilyPad system. Based on the ADXL330 accelerometer from Analog Devices, the LilyPad Accelerometer can... |
£17.50

|
| LLYP-BUZ |
 |
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency... |
£5.55

|
| LLYP-LIGHT |
 |
This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the... |
£5.55

|
| LLYP-PSU |
 |
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch,... |
£10.95

|
| LLYP-BATHOLD |
 |
sku: DEV-10084 If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.... |
£3.40

|
| LLYP-TEMP |
 |
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0... |
£3.60

|
| LLYP-VIB |
 |
Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer.... |
£10.30

|
| LLYP-LIPO |
 |
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the... |
£10.30

|
| LLYP-PB |
 |
sku: DEV-08776 We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when... |
£1.10

|
| LLYP-SLSW |
 |
This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a wearable... |
£2.90

|
| LLYP-PRO-L |
 |
This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil... |
£5.50

|
| LLYP-PRO-S |
 |
This is a small board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil... |
£1.70

|
| LLYP-BOB |
 |
sku: DEV-09384 This is dual-purpose bobbin with 30ft of high quality 4-ply conductive thread. Once the thread is gone, the bobbin doubles as a small... |
£3.50

|
| LLYP-CHOLDER |
 |
sku: DEV-08822 This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the... |
£0.90

|
| CR2032 |
 |
sku: PRT-00338 CR2032 Lithium Ion 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time.... |
£1.30

|
| LLYP-XBEE |
 |
sku: DEV-08937 The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on... |
£10.10

|
| MAG-SNAP10 |
 |
sku: DEV-08697 A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are compact 10mm diameter snaps (all three pieces... |
£1.05

|
| MAG-SNAP18 |
 |
sku: DEV-08682 A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are relatively large 18mm diameter snaps (all three... |
£1.35

|
| LLYP-LEDPCB |
 |
sku: DEV-10071 These boards allow you to use your own 5mm LED as a LilyPad LED. Each board has the correct holes to solder a standard 5mm LED (not... |
£3.30

|
| LLYP-BATCON |
 |
sku: DEV-10083 The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your... |
£2.10

|
| LLYP-SMPO |
 |
sku: DEV-10085 The LilyPad Simple Power is a board that lets you connect a battery (or other power source) and switch it on or off, that's it! We... |
£3.45

|
| LLYPLED-RED |
 |
sku: DEV-10044 Here is a simple 5 pack of red LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
£3.40

|
| LLYP-WHTLED |
 |
A simple, very bright, 250mcd, white LED LilyPad. Light up the night! Supplied in pack of 5. LilyPad is a wearable e-textile technology developed by... |
£3.40

|
| LLYPLED-BLUE |
 |
sku: DEV-10045 Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
£3.40

|
| LLYPLED-GRN |
 |
sku: DEV-10046 Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
£3.40

|
| LLYPLED-YEL |
 |
sku: DEV-10047 Here is a simple 5 pack of yellow LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
£3.40

|