LPC-P2129 Prototype board for LPC2129

FEATURES

• MCU: LPC2129 16/32 bit ARM7TDMI with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
• single power supply: 9VDC required
• power supply status LED
• power supply filtering capacitor
• two channel RS232 interface with two RS232 SUB-D 9 pin connectors
• two channel CAN interface with drivers and two SUB-D 9 pin connectors
• iButton interface circuit
• Frequency input connector
• two buttons
• two status LEDs
• Potentiometer connected to AIN
• RESET circuit with exterman control of Philips ISP utility via RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• 10 Mhz crystal
• extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 115x80 mm (4.5x3.2")

• LPC-P2129.chm

• Schematic

• RS232 initialization demo code
• Blink LED demo code