This Netduino Mini Dev board is designed for educational and experimenting of the Netduino Mini. On board is an USB to serial convertor using the FTDI chip connected to TXD and RXD (pin 11 and 12). This dev board can be powered from USB or external PSU via 2.1mm power socket. The external power is reverse polarity protected. The RS232 port of the Mini (pin 1 and 2) is connected to a male DB9 enabling to use standard null modem cable.
Features
- FTDI USB to serial convertor on pin 11 and 12
- USB or External powered (jumper selectable)
- On board 5v regulator - requires external 9v supply
- Male DB9 connector on pin 1 and 2 for programming and debug
- Reset switch
- Connector for serial LCD on pin 11
- Four servo connections
- Supplied with mini breadboard (colour may vary)
- Dimensions : 100mm x 80mm
Documents
Netduino Mini, LCD, servo and cables not included.
