1.2" x 0.6" - tiny "DIP microcontroller" form factor with edge pins (Pb-free). Designed for breadboard use, production industrial/commercial applications, and robots/UAVs/etc. Same microcontroller as regular Netduino - but smaller and with a bit more RAM available. BASIC Stamp 2 pin-compatible - can be used with most BASIC Stamp 2 boards and kits. Can be programmed via RS232 like BASIC Stamp 2 or via 3.3V USB-TTL cable like Arduino Nano. Can be powered via 9V battery, DC power leads, some USB-TTL cables, etc. Industrial temperature rated (-40 C to 85 C), RoHS compliant, Pb-free.
Features
- Atmel 32-bit microcontroller
- Speed: 48MHz, ARM7
- Code Storage: 128 KB
- RAM: 64 KB
- digital i/o features
- all 16 digital and analog pins: GPIO
- pins 1-3: RS232 TX, RX, DTR
- pins 9-10: I2C SDA, SCL
- pins 11-12: UART 1 TX, RX
- pins 14-16: SPI MOSI, MISO, SPCK
- pins 17-20: PWM, PWM, PWM, PWM
- power pins
- pin 4: GROUND
- pin 21: 5 VDC regulated (input/output)
- pin 22: /RESET
- pin 23: GROUND
- pin 24: 7.5 - 12.0 VDC (input)
Documents
