LilyPad E-Textiles

sku: DEV-08776 We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens wh...

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequenc...

DEV-11891  Description: We know you love adding color to your e-textiles, adding the LilyPad Pixel Board to your project will only make it better. ...

DEV-10899The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even tho...

DEV-11190  The LilyPad Simple just got a whole lot... simpler. We've updated the Simple board to create the LilyPad USB by replacing the classic AT...

DEV-11032 The ProtoSnap series is a great way to prototype your project without a breadboard. Everything is wired together on a single board, which...

DEV-11201  The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which ...

sku: DEV-10275 This is the LilyPad revision of our FTDI Basic. It is the same as our other FTDI Basic, but has a purple LilyPad board which is h...

sku: DEV-10084 If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick...

sku: DEV-10274  This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the L...

sku: DEV-10047 Here is a simple 5 pack of yellow LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-t...

sku: DEV-10046 Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-te...

sku: DEV-10045 Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-tex...

sku: DEV-10044 Here is a simple 5 pack of red LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable e-te...

sku: DEV-10083 The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your Lil...

sku: DEV-10085 The LilyPad Simple Power is a board that lets you connect a battery (or other power source) and switch it on or off, that's it! We p...

sku: DEV-08682 A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are relatively large 18mm diameter snaps (all three...

sku: DEV-08697 A snap is fun, but a magnetic snap adds a whole new layer of possibilities. This are compact 10mm diameter snaps (all three pieces ...

sku: DEV-08937 The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run...

sku: PRT-00338 CR2032 Lithium Ion 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time. Dimen...

sku: DEV-08822 This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing th...

sku: DEV-09384 This is dual-purpose bobbin with 30ft of high quality 4-ply conductive thread. Once the thread is gone, the bobbin doubles as a smal...

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a wearable e...

This is a small board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil t...

This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together with 10mil t...

A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ab...

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch...

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. L...

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 d...

This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the...

This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep...

This is a three axis accelerometer for the LilyPad system. Based on the ADXL330 accelerometer from Analog Devices, the LilyPad Accelerometer can de...

A simple, very bright, 250mcd, white LED LilyPad. Light up the night! Supplied in pack of 5. LilyPad is a wearable e-textile technology developed...

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any co...