Products

The CANopenIA-M0 SoM implements the CANopen protocol compliant to the CiA standards. CANopenIA-M0 is based on the NXP Cortex M0 32-bit micro c...

CAN bus is a protocol used in hundreds of millions of devices including cars, trucks, buses, construction machines, ships, tractors, and spacecraft...

New version with Pico WH on socketed board. CAN bus is a protocol used in hundreds of millions of devices including cars, trucks, buses, constructi...

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the...

sku: SEN-09403 This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas c...

Cat5 UTP Cross Over cable 2m.

Cat5 UTP Patch Cable 4m (grey).

Cat5E UTP Patch Cable 2m (colour may vary).

For years we've seen all sorts of microcontroller-friendly WiFi modules but none of them were really Adafruit-worthy. Either they were too slow, or...

sku: CEL-09607 The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an SM5100B cellular module. This allow...

#3333 Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit P...

sku: PRT-00338 CR2032 Lithium Ion 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time. Dimen...

sku: DEV-08822 This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing th...

sku: LCD-08448 Description: This is a 4-wire resistive analog touch screen. Intended to mate with the 24-Bit PSP display, this unit comes with a h...

sku: BOB-09224 Description: This is the SMD connector for the PSP touch screen. 4-pin right angle good, friction fit connector with 1 mm pitch. D...

This is a very simple breakout board for the popular HMC6352. Remember the KISS mantra? We really enjoy the simplicity and ease of use with the HMC...

The HMC6343 is a solid-state compass module with tilt compensation from Honeywell. The HMC6343 has three axis of magneto, three axis of acceleromet...

sku: COM-09339 This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for ma...

sku: COM-09337 This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for ma...

sku: COM-09341 This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for ma...

sku: COM-09336 This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for ma...

sku: COM-09340 This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for ma...

sku: COM-09337 This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for ma...

"Conductive Temporary Hold" Similar to Vlcro but conductive. One inch wide(25mm). Excellent holding power and RF shielding. Use it to create re-s...

sku: DEV-10172 Description: Here we have some conductive ribbon. Essentially, it's a fabric with 3 conductors woven into the ribbon. It measures r...

    DEV-11791  Description: This is about 329 meter (360 yards) of conductive thread spun from stainless steel fiber and wound on a spool. You can...

DEV-10867This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile...

sku: GPS-11067 The Copernicus II is a great new GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the ...

sku: PRT-11081 Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding an...

Developed in-house and manufactured in the UK using computer controlled laser cutters. Utilising high grade acrylic, this protects your Raspberry ...

Developed in-house and manufactured in the UK using computer controlled laser cutters. Utilising high grade acrylic, this protects your Raspberry P...

Developed in-house and manufactured in the UK using computer controlled laser cutters. Utilising high grade acrylic, this protects your Raspberry P...

Developed in-house and manufactured in the UK using computer controlled laser cutters. Utilising high grade acrylic, this protects your Raspberry ...

Developed in-house and manufactured in the UK using computer controlled laser cutters. Utilising high grade acrylic, this protects your Raspberry ...

Developed in-house and manufactured in the UK using computer controlled laser cutters. Utilising high grade acrylic, this protects your Raspb...

sku: PRT-00337 Description: CR1225 12mm 47mAh coin cell batteries. Perfect small battery for miniature sensor node applications. Dimensions : 12....

sku: DEV-09645 The CUI32 is a new version of the CREATE USB Interface, based on a 32-bit PIC. The CUI32 ships with "StickOS" installed as its defa...

This is a Curiosity Nano PIC18F57Q84 CAN FD Board. The Curiosity Nano is pre-installed onto the carrier board. The carrier board has a CAN FD t...

We now offer a custom laser cut acrylic service. The acrylic is a 3mm Aurora Voilet  Frost colour. Other colours are available upon request.A dra...

We now offer a custom laser cut acrylic service. The acrylic is a 3mm Aurora Voilet  Frost colour. Other colours are available upon request.A drawi...

sku: DEV-10570 The Danger Shield mounts on top of your Arduino r Arduino Pro and equips it with a variety of fun and useful inputs and outputs. Th...

This cable is a DB9 female to a M12 5way Micro C male connector. Features M12 5way Micro C male DB9 female Cable length : 1500mm Typical use ...

This cable is a DB9 female to a OBDII male with a flat cable.Features OBDII male DB9 female Flat cable Cable length : 1500mm Typical use on a CAN...

sku: PRT-10288 This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1...

sku: PRT-10287 This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1...

A 2.1mm DC jack to JST 2 pin converter. This was originally produced for Seeeduino, but it may be used to provide power for 2.54mm Pin on breadboar...

This is a breakout board for our non-isolated, 6A DC-to-DC Converter Module. The module can convert any DC voltage between 4.5-14VDC to a selectabl...