Products

The SL018 can support all the functions of Mifare 1K, Mifare 4K and Ultralight. It does auto Real-time detecting tag which moves into or out of det...

Being developed based on NXP's low power transponder ICs, HF RFID Module SL030 is a mini Mifare reader/writer. It supports Mifare 1K, Mifare 4K, Ul...

eing developed based on NXP's low power transponder ICs, HF RFID Module SL030 is a mini Mifare reader/writer. It supports Mifare 1K, Mifare 4K, Ult...

This fully assembled and tested module is based on the MC33290D ISO driver and SP232 level converter. Using the latest SMD technology the unit mea...

sku: PRT-10687This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator, like electrical tape, but it can withstand temperature...

An assortment of colored wires: you know it’s a beautiful thing. Six different colors of stranded wire in a cardboard dispenser box. Sit this on yo...

sku: SEN-10167 The RHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't ...

sku: SEN-13683 This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is ...

sku: SEN-09569 This is a breakout board for Honeywell's HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as...

sku: SEN-10916    This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydroge...

sku: CAB-00501These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. 5 pairs of IC ...

sku: CAB-09741 Description: These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that a...

sku: SEN-10010 There's a lot of punch packed into this little IMU. The 6DOF Razor makes use of ST's LPR530AL (pitch and roll) and LY530ALH (yaw) g...

The Inertia Measurement Unit Combo Board with the high-precision ADXL203. The ADXL203 sensor is a much higher precision sensor with a range of +/-1...

sku: SEN-10121 This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom....

sku: SEN-00241  Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems includi...

sku: COM-09469This is a very simple, clear infrared LED. These devices operate between 840-850nm and work well for generic IR systems including rem...

sku: COM-09349This is a very simple, clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including rem...

An infrared Proximity Sensor made by Sharp, part number GP2Y0A21YK0F. Features Detecting distance : 10 to 80cm Analog voltage output. Supply v...

 Three pin JST connector with red, black, and yellow colors. Approx. 5 inch wire outs. This cable comes fully assembled as shown and connects direc...

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contrib...

Description  The IOR5E is an Input-Output-Relay board with an enclosure and battery backed RTC. It has space for a Modtronix compact SBC board to b...

sku: GPS-09123 This is an extra long communication cable, 1 foot in length, that mates with the EM406 and EM401. Cut and hack this cable to your n...

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA antennas (not RP-SMA!). Documents: Datasheet

sku: SEN-10266Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, ...

SEN-12829 If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those meas...

This is an isolated CAN-Bus breakout board using the Texas Instruments chipset ISO1050, together with an isolated DC/DC convertor.  Features ...

This is an isolated CAN-Bus breakout board using the Texas Instruments chipset ISO1050, together with an isolated DC/DC convertor.  Features ...

This is an isolated CAN-FD breakout board using the Analog Devices ADM3055E IC with a data rate of upto 8 Mbps. Features 5v supply requirem...

This is an isolated LIN-Bus breakout board using the TJA1028 and MAX12931 ICs. Features LIN 2.0/2.1/2.2 compliant SAE J2602 compliant Inter...

sku: DEV-09760The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduin...

sku: DEV-10549The JPEG Trigger interfaces with the LinkSprite JPEG Colour Camera to simplify picture taking. To take a picture, all you have to do ...

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST (2mm pitch) connector on o...

sku: PRT-09917This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST connector o...

PRT-12796 These are 150mm (6") long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any...

PRT-12794 These are 150mm (6") long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Mul...

PRT-12795 These are 150mm (6") long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any...

These are the highest quality flexible male to male cable jumper wires. This type of breadboard cable wires are most preferred. Wires are flexible,...

Description: These are 155mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any other ...

These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers ca...

PRT-09389 Description: This is a SparkFun exclusive! These are 300mm 12" long jumper wires terminated as female to female. Use these to jumper from...

L Joining plates, in packs of 8. OpenBeam's L joining plate is injection molded out of EMS Grivory GVX, a high-performance, high glass fiber rein...

BOB-13752    The SparkFun AutoDriver makes it easy to put the L6470 Stepper Driver (a.k.a “dSPIN”) to work in your project. Simply connect your mo...

This is a high quality CAN-Bus cable in purple colour. The cable is UL and CSA approved.  Features Seven strands of bare copper 0.22mm (24...

This is a high quality CAN-Bus cable in purple colour. The cable is UL and CSA approved. There are two pairs of cable, the second pair can be use f...

sku: COM-00594  What is a 'laser card' you ask? It is only the coolest thing to hit Spark Fun Electronics since the Color LCD last week! Don't be ...

sku: COM-08654 This is the basic laser card module with circuitry built in so that it can be turned on/off with a TTL input. Includes polarized Mo...

sku: COM-08674 Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the moun...