Products

T Joining plates, in packs of 8. OpenBeam's T joining plate is injection molded out of EMS Grivory GVX, a high-performance, high glass fiber rein...

sku: COM-10302 These tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colors for a total...

Slim clicky momentary switches are standard input "buttons" on electronic projects. These are half the width of classic 6mm tactile switches so th...

This tiny board is an easy way to use Toshiba's TB6612FNG dual motor driver, which can independently control two bidirectional DC motors. An operat...

#3200 Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and...

Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It featur...

This is a CAN FD and LIN-bus board with a Teensy 4.0 (included). It has on board 5v regulator and reverse voltage protection. CAN FD and LIN-...

This is Teensy 4.0 board with CAN FD and a 1.54" 240x240 wide angle IPS TFT LCD display with microSD holder. Features Teensy 4.0 (installed...

This board uses the Teensy 4.0 as a CAN FD to USB converter. The Teensy 4.0 has high speed 480Mbit/s USB HS interface. MCP2558FD CAN FD transcei...

NMEA 2000 This is a Teensy 4.0 (installed) board with a Micro-C connector. This board includes a 480x320 3.5" capacitive touch screen with ILI...

This is a Teensy 4.0 board Classic CAN and CAN FD training board. On board are four potentiometers, LED, RGB LED and switches. This board can...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 480x320 3.5" capacitive touch screen with ILI9488 LCD cont...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 800x480 4.3" capacitive touch screen with SSD1963 LCD cont...

This is a Teensy 4.0 (installed) with a CAN2.0 or CAN FD port. This board includes a 800x480 5.0" capacitive touch screen with SSD1963 LCD cont...

This is a CAN FD and 2 channel LIN-bus board with a Teensy 4.0 (included). It has on board 5v regulator and reverse voltage protection. CAN F...

NMEA 2000 This is a Teensy 4.0 (installed) board with a Micro-C connector for use on a NMEA2000 network. This board includes a 800x480 5.0" ca...

This is a NMEA 2000 simulator using the Teensy 4.0 module (included). Useful for testing NMEA 2000 devices on the bench. Six PGN are adjustabl...

This is a NMEA 2000 simulator using the Teensy 4.0 module (included). Useful for testing NMEA 2000 devices on the bench. Six PGN are adjustabl...

This is a CAN-Bus OBDII ECU simulator using the Teensy 4.0 module (included). Useful for testing OBDII interface and writing diagnostic softwa...

This is a CAN-Bus OBDII ECU simulator using the Teensy 4.0 module (included). Useful for testing OBDII interface and writing diagnostic softwa...

This is a Teensy 4.0 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse volt...

This is a Teensy 4.0 board with triple CAN connections. Two CAN 2.0B and one CAN FD. It can be powered by an external +12v DC with reverse vo...

This is a Teensy 4.0 (installed) with two CAN2.0 and one CAN FD port. A 480x320 3.5" capacitive touch screen with ILI9488 LCD controller. Conn...

NMEA 2000 This is a Teensy 4.0 board with a 240x240 IPS LCD and a Micro-C connector. The board can be powered from the 12v Micro-C connector w...